PPE Xtreme Transmission Cooler

[dmaxadmin]

Xtreme Transmission Cooler

Part#1240600/1240603/1240620

Keep your transmission cool with PPE’s Xtreme transmission cooler. Lower your transmission operating temperature with this bolt on replacement. 60% increase in heat rejection surface lowers temperatures 20-30 degrees. This easy installation only takes about 30 minutes
As summer approaches and we are all looking for ways to cool our transmissions down the PPE unit is a quality unit with a very simple install. Typical install is 30 min as a bolt on replacement. This unit below is the 06-10 application.
Stock next to the PPE



stock in place

PPE in place

All in all its a very simple straight forward install. We expect to see a significant reduction in transmission coolant temps. We will report soon on the actual real world testing, so stay tuned

[DaJokr]

Might replace mine when the cooler lines start to leak.

[dmaxadmin]

Might replace mine when the cooler lines start to leak.

Its a great upgrade.. but of course now since you said it, your lines will never leak, Lol

[DaJokr]

They have been replaced 3 times already. Chances are high that they will need replacing again lol. Especially now with a built transmission.

[8aford97@gmail.com]

I replaced mine Kyle when I had the trans built and put spiral hydraulic wrap on them so I wouldn't have to. Sorry about them rubbing.

[DaJokr]

Yours were custom made were they not?